LED wall light installation guide for beginners

Installing an LED wall light isn’t difficult — even beginners can do it with the right tools and proper safety precautions.

Here’s a simple step-by-step guide.

Step 1: Prepare tools and materials

Before You Start, Make Sure You Have:

LED wall light (with mounting hardware and instructions)
Wall anchors / self-tapping screws
Drill (or hammer drill)
Flathead / Phillips screwdriver
Electrical tape
Pliers
Voltage tester (to check power status)

Step 2: Pre-installation inspection

1. Turn off the power!

Always turn off the appropriate circuit breaker before starting. Ensure the circuit is completely de-energized.

2. Confirm the installation location.

3. Inspect the wall structure.

Ensure the wall is flat, sturdy, and strong enough to support the weight of the light.
Remember these six steps: Turn off the power, mark, drill, connect, repair, and test.